JA93 series Air Jet Loom is new generation of Qingdao Tianyi Red Flag,the company is well-developed after years of efforts made,its performance can be the first of today's international loom comparable.More reasonable frame and warp tensin control system enables high-speed heavy woven fabric more stable weft insertion system more energy efficient.JA93 series jet loom will be its superior performance to lead the Chinese manufacturing industry looms.
1、New super-stable rack
New rack connections increased rigidity,reducing rack deformation during
operation,and enhance the stability of the whole operation is more
suitable for high-speed heavy.
2、More support balanced beating
Sley with a power balance arm structure,increasing the beating force is
reduced while the maximum level of vibration generated by beating,is to
improve the performance of the important part of high speed weaving.
3、Overlapping Taub board structure
Changes need to be changed in the weaving varieties width,the structure
can be easily adjusted on the right side brace,brace avoid truncation or
replace cloth.
4、New rear spar strucrure
Achieve External easing drive,to facilitate the adjustment and
maintenance;about through the tension sensing axis warp tension
accurately transmitted to the tension control system;shortened tension
Liang length,to prevent weaving heavy fabrics caused by bending of the
width direction of the warp tension difference.
项目 | 规格 | 选择件 | |
筘幅 | 公称筘幅 | 190.210.230.250.280.340.360cm | |
有效穿筘幅 |
公称筘幅减0~60cm(190~250cm) | ||
织造范围 | 短纤维:100S/1 ~5.8S/1 | ||
纬纱选择 | 2喷、4喷、6喷自由选择 | ||
动力 | 超启动马达 | ||
按钮式启动、停车、正反转缓慢运动 | |||
通过电磁制动器制动、定位停车 | |||
引纬 | 主喷嘴、副喷嘴并用式 | 拉伸喷嘴 | |
异形钢筘 | |||
辅助主喷嘴 | |||
开口 | 积极式凸轮开口:综框最多10片 | ||
多臂开口:综框最多16页 | |||
送经 | 边盘直径 | 电控送经(EL –O)带自动反转装置 | |
积极送经 | |||
800mm | 914 、1000mm | ||
卷取 | MTU:机械式卷曲 | ETU:电子卷取 | |
最大卷布直径 | 600cm | ||
纬密范围 | MTU:6.6 ~80.5根/cm | ||
(16.7 ~204.4根英寸) | |||
织布长度计数 | 在触摸屏上显示布长、带定尺停车功能 | ||
边撑器 | 下置式或上置式 | ||
打纬 |
曲柄式多筘座脚打纬机构 | ||
测长储纬 | 纬纱滚筒回转式储纬器 | ||
纬纱架 | 落地式4支筒纱(2喷), 落地式8支筒纱(4喷), 落地式10支筒纱(6喷) | ||
绞边 | 行星齿轮方式(中间纱罗绞边) | ||
纱端处理 | 采用捕纱方式握持单侧纱端 | ||
剪纬 | 机械式剪刀 | 电子式剪刀 | |
加油 | 主要传动部分为油浴方式、集中加油(黄油手动) | ||
停车装置 | 断纬 | 光电反射式探纬器,带纬纱到达角度显示功能 | |
断经 | 电气接触式,六排停经片 | ||
其他 | 绞边纱、纱端处理纱断头停车 | ||
停车原因显示 |
触摸屏上显示信息 | ||
中间剪刀 | 机械式(织造双幅时用) |